Orbi Mesh System: Setup and Troubleshooting Tips
Orbi mesh system is easy to install, but you should follow instructions carefully. Down here, you will get to know how to connect Orbi to your home network and how to configure it through orbilogin.net.
We will also share how to solve the technical issues related to the Orbi and its connection like router not receiving signals or router not working.
Connect Orbi to Home Modem
Connection with Orbi router to modem is pretty easy step. Here, in this section, you will get to know how to establish physical connection between Netgear Orbi router and home network. Let’s see how to do it.
Use Ethernet Cable
You can use Ethernet cable to make connection in networking devices, apply some of the instructions.
- Place the router close to modem and find the LAN port of modem and WAN port of router.
- Use the cable and insert it in the router and modem above mentioned ports.
Now, connect all the Orbi devices together, just follow some of the steps to do it.
Use Sync Button to Link Satellites
To connect the router to the satellites, you have to turn on the router and satellites by plugging its wall socket in the wall socket.
- Find the sync button on router device and press it.
- Then, press the same button on the satellite to connect.
After some seconds, the devices will connect to each other automatically. If you see any light like Orbi pink light then you have to check all the connection again to ensure, where the issue lies. Now, let’s take a tour of information where you will learn how to configure Orbi through Orbilogin.net interface.
Configure Orbi Device
To configure the Orbi device, you have to use a computer or laptop and connect it to the Orbi network with the help of LAN cable.
Reach to Orbilogin.net
After connecting the router to the network and connecting computer to it, you have to open the web browser in it.
- Type the URL Orbilogin.net and search it by hitting the Enter button.
- You will get to the login page of the interface; here you have to enter username and password.
- Use the label on the back of the router to find the login credentials.
- By entering the credentials and clicking Log In button, you will reach to the interface.
- On the interface page, you can easily setup the Orbi device as your desire.
- You can also update the device firmware, change admin credentials and much more.
Let’s see how you can solve any problem related to the Orbi device with the help of simple tips and solutions.
Tips to Solve Orbi Problems
We will provide major five solutions and troubleshooting tips which will definitely solve the mentioned issue.
Check Link Between Home Network and Orbi
Connection between the Orbi main unit and modem or main router of you house must be correct. Make sure the home network device LAN port is connected to the WAN port of the main Orbi unit.
Also, check the Ethernet cable is in good condition and if it is damaged then replace it right away.
Dispel Signal Blockage
Your Orbi device WiFi signals can be interrupted by electronic devices like microwave ovens. You must check that the networking devices are not placed close to the any electronic device. If you find one close, then change the location right away and find an optimal one in your house.
Give Orbi Device a Short Break
If your device is getting overheat and Orbi flashing red light, then you have to give a break by turn it off and disconnecting all the internet device from it. To turn off the Orbi device; you can press the power button once or unplug the power cord from the wall socket.
Reboot Orbi Mesh System
At last, if all the above given tips and solutions are not fixing the problem, then you have to reboot the device. To initiate the process, you just have to press the Power button twice. By hitting the power button first time the device will turn off and second time it will restart.
Last Section
Here, from this article, you have learned how to setup Orbi mesh system in your home with the help of simple steps. We have also provided tips and solutions to solve the Orbi technical issues.